摘要:網絡工程師下午考試為應用技術,希賽小編為大家整理了2020年下半年網絡工程師下午真題(一),供大家參考。
試題一(共20分)
閱讀以下說明,回答問題1至問題3,將解答填入答題紙對應的解答欄內。
【說明】
某校園宿舍WLAN網絡拓?fù)浣Y(jié)構如圖1-1所示,數據規劃如表1-1內容所示。該網絡采用敏捷分布式組網在每個宿舍部署一個AP,AP連接到中心AP,所有AP和中心AP統一由AC進行集中管理,為每個宿舍提供高質量的WLAN網絡覆蓋。
圖1-1
表1-1
【問題1】(10分)
補充命令片段的配置。
1.Router 的配置文件
[Huawei] sysname Router
[Router] vlan batch(1)
[Router] interface gigabitethernet 1/0/0
[Router GigabitEthernet 1/0/0] port link-type trunk
[Router GigabitEthernet 1/0/0] port trunk allow-pass vlan 101
[Router GigabitEthernet 1/0/0] quit
[Router] interface vlanif 101
[Router-Vlanifl01]ip address (2)
[Router-Vlanifl01]quit
2.AC的配置文件
#配置AC和其他網絡設備互通
[HUAWEI]sysname (3)
[AC] vlan batch 100 101
[AC] interface gigabitethernet 0/0/1
[AC-GigabitEthernet0/0/1] port link -type trunk
[AC-GigabitEthernet0/0/1] port trunk pvid vlan 100
[AC-GigabitEthernet0/0/1] port trunk allow-pass vlan 100
[AC-GigabitEthernet0/0/1] port-isolate(4) //實現端口隔離
[AC-GigabitEthernet0/0/1] quit
[AC] interface gigabitethernet 0/0/2
[AC-GigabitEthernet0/0/2] port link-type trunk
[AC-GigabitEthernet0/0/2] port trunk allow-pass vlan 101
[AC-GigabitEthernet0/0/2] quit
#配置中心AP和AP上線
[AC] wlan
[AC-wlan-view] ap-group name ap-groupl
[AC-wlan-ap-group-ap-group1] quit
[AC-wlan-view] regulatory-domain-profile name default
[AC-wlan-regulate-domain-default] country-code (5)
[AC-wlan-regulate domain-default] quit
[AC-wlan-view]ap-group name ap-group1
[AC-wlan-ap-group-ap-group1] regulatory-domain-profile(6)
Warning: Modifying the country code will clear channel, power and antenna gain config
Of the config send reset the AP Continue?[Y/N]:y
[AC-wlan-ap-group-ap-group1]quit
[AC-wlan-view]quit
[AC]capwap source interface(7)
[AC] wlan
[AC-wlan-view] ap auth mode mac-auth
[AC-wlan-view] ap-id 0 ap-mac 68a8-2845-62fd//中心AP的MAC地址
[AC-wlan-ap-0] ap-name central AP
Warning: This operation may cause AP reset Continue?[Y/N]:y
[AC-wlan-ap-0] ap-group ap-group1
Warning: This operation may cause AP reset.If the country code changes,it will clear channel,power and antenna gain configuration s of the radio,Whether to continue?[Y/N]:y
[AC- wlan-ap-0] quit
其他相同配置略去
#配置WLAN業務參數
[AC-wlan-view] security-profile name wlan-net
[AC-wlan-sec-prof-wlan-net] security wpa-wpa2 psk pass-phrase(8) aes
[AC-wlan-sec-prof-wlan-net] quit
[AC-wlan-view] ssid-profile name wlan-net
[AC-wlan-ssid-prof-wlan-net] ssid(9)
[AC-wlan-ssid-prof-wlan-net] quit
[AC-wlan-view] vap-profile name wlan-net
[AC-wlan-vap-prof-wlan-net] forward-mode tunnel
[AC-wlan-vap-prof-wlan-net] service-vlan vlan-id(10)
[AC-wlan-vap-prof-wlan-net] security-profile wlan-net
[AC-wlan-vap-prof-wlan-net] ssid-profile wlan-net
[AC-wlan-vap-prof-wlan-net] quit
[AC-wlan-view] ap-group name ap-group1
[AC-wlan-ap-group-ap-groupl] vap-profile wlan-net wlan 1 radio 0
[AC-wlan-ap-group-ap-group1] vap-profile wlan-net wlan 1 radio 1
[AC-wlan-ap-group-ap-group1] quit
【問題2】(6分)
上述網絡配置命令中,AP的認證方式是(11)方式,通過配置(12)配置。
(11)~(12)備選答案:
A、MAC
B、SN
C、AP地址
D、AP組
將AP加電后,執行(13)命令可以查看到AP是否正常上線。
(13)備選答案:
A. display ap all
B. display vap ssid
【問題3】(4分)
1.組播報文對無線網絡空口的影響主要是(14),隨著業務數據轉發的方式不同,組播報文的抑制分別在(15)和(16)配置。
2.該網絡AP部署在每一間宿舍的原因是(17)。
相關推薦:2020年網絡工程師下午真題及答案解析
軟考備考資料免費領取
去領取